Products

• EtherCat Hybrid Servo Driver

  Product Information E5-CAT-HS68D is Shenzhen ECON Technology's new EtherCAT hybrid servo driver,using the latest floating-point 64-bit MCU digital processing technology,the drive control algorithm...

• EtherCat Open Loop Stepper Driver

  Product Information E5-CAT is our company's new EtherCAT bus driver,using the latest floating-point 64-bit MCU digital processing technology,the drive control algorithm using advanced variable...

• Nema23 Hybrid Servo Motor With 1000PPR And 2.9Nm Torque

  Nema23 size hybrid servo motor,with 2.9Nm torque,8mm motor shaft,21mm length of motor shaft,4 lead wires,100mm motor length,1000PPR encoder,A、B channel differential connection terminal,widely...

• Nema17 Step Servo Motor With 0.8Nm Torque

  This is the largest torque of Nema17 size step servo motor,with 0.8Nm torque,8mm motor shaft,4 lead wires,82mm motor length,best use for the machine that requires for high speed and stable.

• Closed Loop Stepper Motor With 0.6Nm Nema17

  Another model in Nema17 size,with 0.6Nm output torque,8mm motor shaft,76mm motor length,4 lead wire,2.3A current,3VDC rated voltage,it is best for machines such as winding machine

• Hybrid Servo Motor Nema17 With 0.4Nm

  This Nema17 hybrid servo motor ,output torque 0.4Nm,motor shaft 8mm,motor length 69mm,current 1.68A,4 leads,1000PPR encoder,2.8VDC rated voltage.Small torque easy servo motor is avaliable for some...

• Three Phase Stepper Motor Driver DC Voltage

  It is a three phase stepper motor driver,voltage range is 24~75VDC,current is 8.2A,support RS232 and RS485,can tune motor&driver parameters through ProTuner software on PC

• Stepper Motor Drivers AC Input Voltage

  EO860AH is the stepper motor driver that can use as AC/DC input voltage,RMS current 6.0A,has good using experience on CNC router and laser cutting machine

• 7.2A Bipolar Stepper Motor Drivers

  EO872 bipolar stepper motor drivers,RMS current 6A,recommend using voltage 68V,mostly used on laser markers,cutting machine,cnc router

• 2 Phase Stepper Motor Driver 5.6A Current

  EO556 is the standard 2 phase stepper motor driver,its RMS current is 4A,satisfy mostly machines

• 2 Phase Open Loop Stepping Drive EO542

  EO542 is the standard 2 phase open loop stepping drive,this drive and EO872 are two stardard stepping drive for most machines. This stepping drive has the feature with(without) serial port to tune...

• 2 Phase Stepper Motor Controller 3A current

  EO430 is 3A current low voltage 2 phase stepper motor controller,suitable for some small machines,light load,low torque,like 3D printers.