Products

• LCD Display EtherCAT Hybrid Servo Driver

  New generation EtherCAT hybrid servo drivers,it has below outstanding features: 1.AC and DC power in one driver,Max voltage is 100V,and Max current is 8A 2.LCD display,can show any data that...

• EtherCAT Bus Step Servo Drive EHS-580

  EHS-58o is one of the EtherCAT Bus closed loop stepper drive,the current is 8A(peak),work with nema23,nema24 and nema34 closed loop stepping motor with different encoder resolution.It is the...

• EtherCAT Bus Stepper Motor Controller EST-584

  EST-584 is one of the EtherCAT Bus stepper driver,the current is 8.4A(peak),work with nema23,nema24 and nema34 stepping motor.It is the standard EtherCAT products,support CoE protocol

• EtherCAT Bus Stepper Driver EST-556

  Product Introduction The model EST-556 is one of the EtherCAT Bus series stepper drive.As the standard EtherCAT slave，EST-556 supports the CANopen over EtherCAT(CoE). EST-556 can work with nema23...

• 2.5A EtherCAT Stepper Driver(EST-525)

  EST-525 EtherCAT stepper driver,it is current range from 0.3A to 2.5A,and work with nema11,nema14 and nema17 stepper motor.ECON TECH EtherCAT stepper driver can use with the PLC or controller...

• BLDC Servo Drive With CANopen Communication

  Product Features
  1.Drive 40W~300W BLDC servo motor
  2.Support CiA 301/402 communication protocols
  3.1 line analogy input(0~5V)
  4.Maximum communication rate of 1 Mbps...

• Hybrid Servo Drive With CANopen Communication

  Features:
  1.Support CiA 301/402 communication protocols
  2.Power NEMA 17-34 closed loop stepper motors
  3.Parameters Auto-Tuning function
  4.High compatibility with popular...

• Stepper Drive With CANopen Communication

  Features:
  1.Support CiA 301/402 communication protocols
  2.1 line analogy input(0~5V)
  3.High compatibility with popular CANopen master controllers
  4.Max 50 VDC input...

• ModBus RS485 Controls BLDC Servo Drive

  Outstanding Features
  1.support MODBUS-RTU communication protocol
  2.can drive 40W~300W BLDC servo motor
  3.Parameters Auto-Tuning Function
  4.Current automaticlly reduce to...

• ModBus RS485 Closed Loop Stepper Drive

  Highlight:
  1.Support MOdBus standard RS485 control
  2.Drive 2 phase closed loop stepper motor
  3.Max input voltage 50VDC
  4.Max output current 8.0A
  5.Parameters...

• ModBus RS485 Open Loop Stepper Drive

  Highlight Features
  1.Support CiA301/402 communication protocols
  2. Drive 2 phase open loop stepper motor and 3 phase open loop stepper motor
  3. 1 analogy input(0~5V...

• EtherCAT DC Brushless Servo Drive

  Product Introduction E5-CAT-BL68D is the dc brushless servo drive that use Coe(CANopen over EtherCAT) protocol,it drives normal dc brushless servo motor,and it can work with Beckoff、Delta and...