Products

• Nema34 Easy Servo Motor 4.5N.M

  This easy servo motor is nema34,torque 4.5,standard encoder is 1000PPR,can customize 2500 and 5000PPR too,recommend power supply 60V,most use on some bigger torque output machine

• Nema34 Easy Servo Motor 8.5N.M with 1000PPR encoder

  ECON offers hybrid servo motors (stepper motors with encoders) from NEMA 23 to 42 with torque up to 12 Nm .These hybrid servo motors are integrated with 1,000-line incremental encoder.Compared...

• Steppeing motor controller

  This model stepper drive,apply for advanced technology,imporve the motor and drive performance,with PUL&DIR and CW&CCW mode,have RS232 port to tune parameters,make product's easy to use.

• digital Stepper Drive

  ECON provides stepper drives From 2 phase to 3 phase, DSP digital, 24--80 DC input or 24--220VAC input. The stepper drives have been used by thousands of OEM clients in the world from many of...

• 2 phase microstep Stepper Drive

  The stepper driver is 5.6A,can work with nema17 and nema23 stepper motor,this model DM556 is for some customers that need to replace other brands model,like Leadshine,Yako

• 2 phase Digital Microstep Stepper Drive

  ECON provides tens of models of stepper drives. From 2 phase to 3 phase, DSP digital, 24--80 DC input or 24--220VAC input. The stepper drives have been used by thousands of OEM clients in the...

• Stepping controller

  ECON provides tens of models of stepper drives. From 2 phase to 3 phase, DSP digital, 24--80 DC input or 24--220VAC input. The stepper drives have been used by thousands of OEM clients in the...

• 3 phase stepper driver 8A current

  3 phase stepping motor driver,DC power supply,20~50V,peak current under 8A,pure sine current vector control technology,good application on dispenser,laser cutting and labeling machine

• Digital Microstep Stepper motor controller current 4.2A

  This model stepper driver controller,it is 3 phase,and driving voltage is AC110~220V,its peak current is 4.2A,5V/24V signal input compatiable,has good using experience on spring machine,bending...

• Stepper motor driver in high Voltage with digital microstep

  ECON provides tens of models of stepper drives. From 2 phase to 3 phase, DSP digital, 24--80 DC input or 24--220VAC input. The stepper drives have been used by thousands of OEM clients in the...

• 2 Phase Stepper Motor Nema 17 Series

  ECON offers high quality 2 phase 1.8° stepper motor which is made of high quality cold roll sheet copper and anti-high temperature permanent magnet. Those 2 phase stepper motors are available in...

• 2 Phase Stepper Motor Nema 23 Series

  ECON offers high quality 2 phase 1.8° stepper motor which is made of high quality cold roll sheet copper and anti-high temperature permanent magnet. Those 2 phase stepper motors are available in...