Hybrid Servo

• Easy Servo Motor 12Nm With 1000PPR Encoder In Nema34 Size

  Nema34,is a 12Nm torque easy servo motor,it satisfy some machines big torque requirement.As the same quality as other hybrid servo motors,it perfects very well.

• Easy Servo Drive

  EC808D is one of model of our TS series hybrid servo drive(easy servo),it has below features: 1.EC808D power supply is 24~80V DC,recommend to use 48VDC 2.EC808D matches with easy servo motor...

• closed loop stepper motor driver

  EC808AH is the closed loop stepper drive can use AC and DC power supply,it has below features: 1.EC808AH power supply is 24~80V AC and 24~110VDC 2.Recommend frame size 60mm and...

• hybrid servo driver use with high voltage

  EC1108AH compares with other member,the main difference is that EC1108AH' is high voltage input,and AC/DC can change to use. 1.It uses 48~130VAC power supply or 48~150VDC power 2.Peak...

• Hybrid servo motor nema23 torque 1.2Nm

  Hybrid servo motor brief introduction 1.The frame size is 57mm,and motor total length is 97mm,shaft is 8mm 2.The holding torque is 2.2Nm,current is 5A 3.match with hybrid servo drive...

• closed loop stepper motor nema23 torque 2.2Nm

  This model hybrid servo motor is nema23,torque 2.2Nm,square encoder,mostly use for some machines that requires high speed,stable and smoothness,4 leads.

• Nema 17 Hybrid Stepper Motor With 1000PPR Encoder With 0.3Nm

  This model hybrid stepper motor with 1000PPR encoder is a small motor,with 0.3Nm output torque,motor shaft 8mm,motor length 61mm,current 2.3A,4 leads,statisfy some small machine requirements

• Nema 17 0.8Nm Closed Loop Stepper Motor

  This model hybrid stepper motor with 1000PPR encoder is a small motor,with 0.3Nm output torque,motor shaft 8mm,motor length 61mm,current 2.3A,4 leads,statisfy some small machine requirements

• Nema24 Easy Servo Motor 4.N.M with 1000PPR encoder

  It is nema24 easy servo motor,for customer flange requirement on 60mm,with toruqe range 1.5~4Nm,customized shaft and encoder PPR.Widely used on laser machine,router machine,packing...

• Nema24 Easy Servo Motor 3.0 N.M with 1000PPR encoder

  ECON offers hybrid servo motors (stepper motors with encoders) from NEMA 23 to 42 with torque up to 12 Nm .These hybrid servo motors are integrated with 1,000-line incremental encoder.Compared...

• Nema34 Easy Servo Motor 4.5N.M

  This easy servo motor is nema34,torque 4.5,standard encoder is 1000PPR,can customize 2500 and 5000PPR too,recommend power supply 60V,most use on some bigger torque output machine

• Nema34 Easy Servo Motor 8.5N.M with 1000PPR encoder

  ECON offers hybrid servo motors (stepper motors with encoders) from NEMA 23 to 42 with torque up to 12 Nm .These hybrid servo motors are integrated with 1,000-line incremental encoder.Compared...