ECONTECH T2-CAN CANopen stepper drive communication with delta PLC---Operations
A: Install EDS file- use CANopenBuild to install EDS file
Open the software CANopenBuild→tool→EDS operation→install EDS file, as below
In the next dialog, select“install EDS file”
Select the EDS file in its located folder ,and click “NEXT”
Select a suitable icon
The installation is completed
B: Scan/Add master station and slave station
Set up→communication→series port
Click “on line”
Scan the master station and confirm the communication channel
In the next dialog shows scanning the node
