Shenzhen ECON Technology Co.,Ltd
call us on: +8613620961024
Home > News > Content

Methods To The Accuracy Of Easy Servo System Improvement

Shenzhen ECON Technology Co.,Ltd | Updated: Oct 07, 2017

Methods to improve the accuracy of easy servo system

The steps to improve the accuracy of the easy servo system as following:

1. Transmission clearance compensation

Improve the machine tool transmission components of the gear, screw manufacturing assembly accuracy and take measures to 

eliminate the transmission gap,only reduce but can not completely eliminate the transmission gap.Mechanical transmission chain change movement or rotation direction,the beginning number of command pulses only can play a role in eliminating the gap,resulting in stepper motor idle,and the table without actual movement,leading to transmission error.

Compensation method: first measure and store the gap size, receive reverse displacement command,does not output to the stepper motor reverse displacement pulse,and convert the gap value to pulse number N,drive stepper motor to rotate,over the transmission gap,then follow the instruction pulse to act.

2. Pitch error compensation

The manufacturing error of the ball screw pitch in the transmission chain directly affects the displacement accuracy of the machine table.

Compensation method: set a number of compensation points, at each compensation point measure and record the table displacement

error,determine the compensation value and as a control parameter send to the NC device.When the equipment is running, the CNC will add compensation amount and compensate the pitch error after work table pass by each compensation station.

3.Micro-step lines

Micro-step drive:Driving method is to subdivide the stepper motor's step angle into several steps.

Contact Us

Shenzhen ECON Technology Co.,Ltd

Add: 2F, Building B, Jintai Industrial Park, Hangcheng Avenue, Gushu Village, Xixiang Street, Bao'an Area, Shenzhen, Guangdong, China

Tel: 0755-2331 9542

Fax: 0755-2331 9542

Tel: +86 136 2096 1024


© Shenzhen ECON Technology Co.,Ltd