Shenzhen ECON Technology Co.,Ltd
call us on: +8613620961024
Home > News > Content

How To Judge The Noise Source Of Stepper Motor

Shenzhen ECON Technology Co.,Ltd | Updated: Jul 18, 2018

How to judge the noise source of stepper motor

The noise of the stepper motor is unavoidable, but its use conditions and control methods can be controlled to relatively reduce the noise. There are two main aspects to the generation of motor noise: intrinsic noise and resonance.

Inherent noise: The mutual contact of mechanical structures during the rotation of the motor. It is impossible to eliminate, but the noise can be reduced to some extent by some methods. Adjust the load or drive current to avoid noise caused by motor out-of-step (jump) due to excessive load (too small); use subdivision drive to make the change of motor current as close as possible to the cosine curve, reduce by fluctuations in output torque caused by current changes, causing some noise;

Noise caused by resonance: Since the motor has a certain resonance area, it is used in this speed range, which will cause the motor to resonate and generate noise. Therefore, noise caused by resonance should be avoided the motor operates near the resonance zone; when the motor accelerates from the lower resonance zone, it should accelerate as quickly as possible, away from the resonance zone, and reduce noise.

Shenzhen ECON Technology is special for stepper drive,hybrid servo drive,stepper motor,hybrid servo motor,integrated stepper motor drive,EtherCAT stepper drive,EtherCAT closed loop stepper drive.

Contact Us

Shenzhen ECON Technology Co.,Ltd

Add: 2F, Building B, Jintai Industrial Park, Hangcheng Avenue, Gushu Village, Xixiang Street, Bao'an Area, Shenzhen, Guangdong, China

Tel: 0755-2331 9542

Fax: 0755-2331 9542

Tel: +86 136 2096 1024


© Shenzhen ECON Technology Co.,Ltd